Help with C2 + D&N MEM_CM9 board + D13

MK14HAK
Posts: 336
Joined: Wed Mar 16, 2011 1:49 am
Location: New Zealand

Re: Help with C2 + D&N MEM_CM9 board + D13

Post by MK14HAK » Mon Feb 11, 2019 8:23 pm

Phil, you could also try dumping autoDC lod file to the C2 and use it as a disk exerciser. Try the disk commands and check your chip selects and control lines and stepping etc. Use >0240G to INIT the FDC if you have to reset and re enter autoDC with >1247G
Mike

PS Dave, I've just about finished converting your 470 !
600RevB:16K,2MHz,64x32,470,CEGMON
SuperKit:502,540B,542B,CEGMON, 8" and 5" FDDs
Cards:PE IO,6522 D-A-D, AY3-8910,ProgramGraphics,Color,UK101
WIP:HexDOS,FDD Emulator

nama
Posts: 297
Joined: Wed Mar 30, 2011 9:44 am
Location: New Zealand
Contact:

Re: Help with C2 + D&N MEM_CM9 board + D13

Post by nama » Mon Feb 11, 2019 10:35 pm

Hi Mike, Thanks for the info. I'll give it a go.

Phil

2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono), D13 + Gotek
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON
Spares - 2 x 527, 1 x 527 [600, 610, D13 boards]

nama
Posts: 297
Joined: Wed Mar 30, 2011 9:44 am
Location: New Zealand
Contact:

Re: Help with C2 + D&N MEM_CM9 board + D13

Post by nama » Fri Mar 29, 2019 6:53 am

OMG...it works!

That took a while...
Don't ask me how I exactly did it. I tried soooooo may combinations, and suddenly it started working.
IMG_7930.JPG
IMG_7930.JPG (89.92 KiB) Viewed 244 times

2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono), D13 + Gotek
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON
Spares - 2 x 527, 1 x 527 [600, 610, D13 boards]

dave
Site Admin
Posts: 530
Joined: Tue Sep 09, 2008 5:24 am

Re: Help with C2 + D&N MEM_CM9 board + D13

Post by dave » Sun Mar 31, 2019 3:41 pm

Very nice!

Post Reply