I finally got my keys done, so this phase of the project is complete!!
I had a couple missed traces on the 600 board but all in all it is a great success IMO.
I have tested both boards extensively and all is working as it should.
Bonus data seperator project works flawlessly and is setup for motor control with hexdos if i can ever find a copy
original 600 board
Replica board
original 610
replica 610
i am super happy with the keys they are very close to the originals
I am still working on the 620 and 630 boards
P.S. if anyone is interested in any of these boards or keys i had extras made just p.m. me
Grant
Finished 600/610 replica project
-
- Posts: 232
- Joined: Tue Dec 09, 2014 12:53 am
Finished 600/610 replica project
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Finished 600/610 replica project
PM Sent.
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Site Admin
- Posts: 717
- Joined: Tue Sep 09, 2008 5:24 am
Re: Finished 600/610 replica project
Grant, this is really an amazing project.
From the bare board, it looks like your replica takes modern Cherry keys, which is wonderful. I'm interested in the details of the keycaps you had made. Were they custom made by Cherry, or elsewhere? Would you mind sharing information on how others can have keys made as well, when you run out?
Also, do these keys fit the standard cutout on a C1P case?
Dave.
From the bare board, it looks like your replica takes modern Cherry keys, which is wonderful. I'm interested in the details of the keycaps you had made. Were they custom made by Cherry, or elsewhere? Would you mind sharing information on how others can have keys made as well, when you run out?
Also, do these keys fit the standard cutout on a C1P case?
Dave.
-
- Posts: 232
- Joined: Tue Dec 09, 2014 12:53 am
Re: Finished 600/610 replica project
The keys were custom made buy signature plastics for me , they are doubleshot keys the same as originals so the legends will not wear cherry does not do doubleshot anymore, it should fit in the case cutout but they sit lower to the boardFrom the bare board, it looks like your replica takes modern Cherry keys, which is wonderful. I'm interested in the details of the keycaps you had made. Were they custom made by Cherry, or elsewhere
i looked into the keys from WASD like on the superboard III but thats the best they could do, mind you these are not cheap
original on right
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
- Posts: 369
- Joined: Wed Mar 30, 2011 9:44 am
- Location: New Zealand
- Contact:
Re: Finished 600/610 replica project
Were you able to get the some high res images of the boards before you built them up?
if so, is there a place where they can be downloaded?
Cheers
P.S. your machine is a work of art!
if so, is there a place where they can be downloaded?
Cheers
P.S. your machine is a work of art!
2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono) [SOLD]
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON + 610 board 24k + D13
Spares - 3 x 527, 1 x 505, Backplane
-
- Posts: 2
- Joined: Fri Feb 27, 2015 4:40 pm
Re: Finished 600/610 replica project
I am pondering doing a Superboard II emulation using a PIC microcontroller (I think I can get almost the whole 600 / 610 board into one chip!). The keys are a major stumbling block. I see you had some made. How many sets would still be available, and at what cost? I just recently learned that there are still die-hards out there using my HexDOS, and I think it would be great to have a teaching tool that acts like an early PC, with the ability to see inside at what makes it tick.
-
- Posts: 356
- Joined: Wed Mar 16, 2011 1:49 am
- Location: New Zealand
Re: Finished 600/610 replica project
Was there a CEGMON for RevD?
Does anyone else get a Syntax error when deleting a line then pressing return? Happens in both video modes?
Does anyone else get a Syntax error when deleting a line then pressing return? Happens in both video modes?
600RevB:16K,2MHz,64x32,470,CEGMON
SuperKit:502,540B,542B,CEGMON, 8" and 5" FDDs
Cards:PE IO,6522 D-A-D, AY3-8910,ProgramGraphics,Color,UK101
WIP:HexDOS,FDD Emulator
SuperKit:502,540B,542B,CEGMON, 8" and 5" FDDs
Cards:PE IO,6522 D-A-D, AY3-8910,ProgramGraphics,Color,UK101
WIP:HexDOS,FDD Emulator
-
- Posts: 15
- Joined: Thu Jul 24, 2014 12:54 pm
Re: Finished 600/610 replica project
I know this is an old thread and all.
Since I recently got my old Superboard/600 out and working again, I was wondering if there were any of the 610 boards left. I never did have one of those back in the day and would love to add one to it.
Thanks
David
Since I recently got my old Superboard/600 out and working again, I was wondering if there were any of the 610 boards left. I never did have one of those back in the day and would love to add one to it.
Thanks
David
Working OSI 600 Rev D with metal case
second 600 Rev D with PIA/Memory board and metal case, working status unknown
Mittendorf board for the Superboard - not working
second 600 Rev D with PIA/Memory board and metal case, working status unknown
Mittendorf board for the Superboard - not working
-
- Site Admin
- Posts: 717
- Joined: Tue Sep 09, 2008 5:24 am
Re: Finished 600/610 replica project
If Grant(Klyball) doesn't have any left, then I still do. Also, Grant has shared his Gerber files for the 610 and 600 boards. They can be downloaded from the archive, or from Github.
-
- Site Admin
- Posts: 717
- Joined: Tue Sep 09, 2008 5:24 am
Re: Finished 600/610 replica project
Grant, I see that the image links in your original post have expired. Do you think you could upload the images as attachments, so we can have them permanently available here? They are so gorgeous, I'd hate for anyone to miss out!