Hi Grant,
Yes, I see your note now. RTFM!
As for the video, the buffers are 8T28s and I have rechecked the memory section 3 other jumpers (R32 to Vcc, vias under U56 to connect pin 2 of U57 to J3 pin 8 and pin 15 on U59 to adjacent via).
Would these cause the characters to display backwards or are there other jumpers to configure??
Building the KLyball 600D
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Building the KLyball 600D
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Posts: 232
- Joined: Tue Dec 09, 2014 12:53 am
Re: Building the KLyball 600D
I will confirm that these are the correct connections when I get home, I can't remember what problems it caused without the connections . But when I brought the board up I got video fixed first then memory and finally the lifted pin to boot. I think I would have remembered if it was backwards, but short term is failing me
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Building the KLyball 600D
I got the video working. It was the character generator. I found a different file, burned it, tried it and we're all good now!
Just got to get the serial working. When I type SAVE, it goes into limbo.
Just got to get the serial working. When I type SAVE, it goes into limbo.
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Posts: 232
- Joined: Tue Dec 09, 2014 12:53 am
Re: Building the KLyball 600D
J3 on revision D needs to be configured, with out the baud divider connected there is no tx/rx clock to the 6850
Last edited by Klyball on Wed Jun 24, 2015 3:01 am, edited 1 time in total.
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
- Posts: 370
- Joined: Fri Mar 07, 2014 4:44 am
- Location: British Columbia, Canada
Re: Building the KLyball 600D
Bill, can you post the file, so there is no confusion? Thanks!BillO wrote:I got the video working. It was the character generator. I found a different file, burned it, tried it and we're all good now!
/Jeff
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Building the KLyball 600D
@KLyball - Thanks Grant for posting that. I finally figured it out after looking through the schematic for a while. Too long, really. Ahhh...
Is that new (600D) Superboard II doc available on-line somewhere? It would be nice to have a copy.
@Jeff. The character generator file that worked for me is attached below.
Is that new (600D) Superboard II doc available on-line somewhere? It would be nice to have a copy.
@Jeff. The character generator file that worked for me is attached below.
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Posts: 232
- Joined: Tue Dec 09, 2014 12:53 am
Re: Building the KLyball 600D
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Building the KLyball 600D
Thx Grant!
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Building the KLyball 600D
My 600D is up and running at 100%! Thanks everyone for your assistance on this!
Now, here's more good news. My memory expansion board functions 100% too on this mainboard. So that project can now continue.
BTW, what baud rates do you folks use and what do you use for end of line and character delays for text transfers?
Now, here's more good news. My memory expansion board functions 100% too on this mainboard. So that project can now continue.
BTW, what baud rates do you folks use and what do you use for end of line and character delays for text transfers?
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Posts: 370
- Joined: Fri Mar 07, 2014 4:44 am
- Location: British Columbia, Canada
Re: Building the KLyball 600D
9600 no delays