Building the KLyball 600D

Post Reply
waltermixxx
Posts: 118
Joined: Sun Feb 03, 2019 10:31 pm

Re: Building the KLyball 600D

Post by waltermixxx » Mon Apr 08, 2019 4:28 am

Well it's done, and It's working :)
I had a bit of a false start with a "gammy" SYNMON" eprom,
I borrowed the CEGMON from my REV. B board and my REV. D is fully functional, and populated.
Thanks everyone for the boards and support, :) 502 is next, along with 541B and 542. :)

Cheers. :)
IMG_0275.jpeg
IMG_0275.jpeg (1.27 MiB) Viewed 1517 times
IMG_0274.jpeg
IMG_0274.jpeg (806.21 KiB) Viewed 1517 times
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B. :)

waltermixxx
Posts: 118
Joined: Sun Feb 03, 2019 10:31 pm

Re: Building the KLyball 600D

Post by waltermixxx » Mon Apr 08, 2019 10:43 am

He He, ok not exactly done, I still have to install the matrix of keyboard switches and caps,
and some kind of support for the Space bar. :) but at least the electronics and computerie bits work. :)

Cheers.
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B. :)

BillO
Posts: 141
Joined: Tue Jul 08, 2014 4:03 pm
Location: Canada
Contact:

Re: Building the KLyball 600D

Post by BillO » Mon Apr 08, 2019 2:48 pm

Congratulations!
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
KLyball memory card

Jeff
Posts: 330
Joined: Fri Mar 07, 2014 4:44 am
Location: British Columbia, Canada

Re: Building the KLyball 600D

Post by Jeff » Mon Apr 08, 2019 4:29 pm

Awesome!!! Great work!

/Jeff
Image

Steve Gray
Posts: 281
Joined: Mon Oct 06, 2008 1:54 pm
Location: Markham, Ontario, Canada
Contact:

Re: Building the KLyball 600D

Post by Steve Gray » Tue Apr 09, 2019 3:10 am

Looking good! I’ll be picking your brain when I finally work on mine ;-)
Last edited by Steve Gray on Tue Apr 09, 2019 12:16 pm, edited 1 time in total.
C4P working, C1P working. 600D Replica working, C4P+D&N floppy not working. 505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested.

Klyball
Posts: 195
Joined: Tue Dec 09, 2014 12:53 am

Re: Building the KLyball 600D

Post by Klyball » Tue Apr 09, 2019 8:18 am

Nice, I like the screw terminals
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598

waltermixxx
Posts: 118
Joined: Sun Feb 03, 2019 10:31 pm

Re: Building the KLyball 600D

Post by waltermixxx » Tue Apr 09, 2019 3:42 pm

Thank you. :)

I thought it might be a nice way to hook up the very few things that might need to be connected there. :)

Cheers. :)

I think I'm gonna have to harvest keys from a usb mx keyboard I purchased. Blue MX keys,
I'm hoping they are 5 pin :)
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B. :)

nama
Posts: 299
Joined: Wed Mar 30, 2011 9:44 am
Location: New Zealand
Contact:

Re: Building the KLyball 600D

Post by nama » Wed Apr 10, 2019 2:59 am

Looks Great!

2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono), D13 + Gotek
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON
Spares - 2 x 527, 1 x 527 [600, 610, D13 boards]

waltermixxx
Posts: 118
Joined: Sun Feb 03, 2019 10:31 pm

Re: Building the KLyball 600D

Post by waltermixxx » Wed Apr 10, 2019 4:12 am

I harvested some blue MX switches from a usb keyboard.
I have not soldered these in yet, but will most likely do that tomorrow...
IMG_0285.JPEG
IMG_0285.JPEG (1.14 MiB) Viewed 1461 times
IMG_0287.JPEG
IMG_0287.JPEG (1.52 MiB) Viewed 1461 times
IMG_0288.JPEG
IMG_0288.JPEG (963.11 KiB) Viewed 1461 times
might use this hardware (may have to extend the cross bar....
IMG_0289.jpeg
IMG_0289.jpeg (850.22 KiB) Viewed 1461 times
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B. :)

waltermixxx
Posts: 118
Joined: Sun Feb 03, 2019 10:31 pm

Re: Building the KLyball 600D

Post by waltermixxx » Thu Apr 11, 2019 11:29 am

I will post pictures of the completed board later today. These mx blues (harvested keys at least) bounce a bit. When the brand new Gateron keys come in, I will replace them. But she works.
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B. :)

Post Reply