Building the KLyball 600D

Post Reply
waltermixxx
Posts: 118
Joined: Sun Feb 03, 2019 10:31 pm

Re: Building the KLyball 600D

Post by waltermixxx » Thu Apr 11, 2019 1:05 pm

Here is the "final" build: (waiting on space bar stabilizer from amazon). Soldering the keys in was not too much of a hassle,
soldered in 1 pin of each switch, then adjusted each key straight and resoldered the pin, and then the second one. :)
IMG_0295.JPEG
IMG_0295.JPEG (1.14 MiB) Viewed 1838 times
IMG_0294.JPEG
IMG_0294.JPEG (1.05 MiB) Viewed 1838 times
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B. :)

dave
Site Admin
Posts: 561
Joined: Tue Sep 09, 2008 5:24 am

Re: Building the KLyball 600D

Post by dave » Thu Apr 11, 2019 1:35 pm

That looks fantastic!

waltermixxx
Posts: 118
Joined: Sun Feb 03, 2019 10:31 pm

Re: Building the KLyball 600D

Post by waltermixxx » Thu Apr 11, 2019 2:36 pm

Thank you :)
Colour add on card is next.
going to point to point solder this, and see how I make out. :)
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B. :)

Jeff
Posts: 331
Joined: Fri Mar 07, 2014 4:44 am
Location: British Columbia, Canada

Re: Building the KLyball 600D

Post by Jeff » Thu Apr 11, 2019 3:18 pm

Congrats!!!

/J
Image

waltermixxx
Posts: 118
Joined: Sun Feb 03, 2019 10:31 pm

Re: Building the KLyball 600D

Post by waltermixxx » Thu Apr 11, 2019 11:17 pm

Serial port Settings for the REV. D.
to use the 600 REV. D at 9600 what changes need to be made?
pin 11 to 11, was changed to pin 2 to pin 11. Just wondering what
modifications need to be made to run at 9600? :)

(It's Bluetooth time!) :)

Cheers. :)

Steve Provided the info:
the mod is the same, except no track to cut, Pin 2 of U30 to Pin 2 of U57
and that's 9600 baud. :)
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B. :)

Klyball
Posts: 195
Joined: Tue Dec 09, 2014 12:53 am

Re: Building the KLyball 600D

Post by Klyball » Fri Apr 12, 2019 5:40 am

Don't forget the j3 config is different the info is back in the thread
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598

waltermixxx
Posts: 118
Joined: Sun Feb 03, 2019 10:31 pm

Re: Building the KLyball 600D

Post by waltermixxx » Fri Apr 12, 2019 2:50 pm

I will hard wire it for 9600 baud and just serial out. Yup I saw the post you were talking about with the switch. :0). Serial port testing later today.
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B. :)

Jeff
Posts: 331
Joined: Fri Mar 07, 2014 4:44 am
Location: British Columbia, Canada

Re: Building the KLyball 600D

Post by Jeff » Fri Apr 12, 2019 4:58 pm

Please link the info/thread.
/J
Image

waltermixxx
Posts: 118
Joined: Sun Feb 03, 2019 10:31 pm

Re: Building the KLyball 600D

Post by waltermixxx » Fri Apr 12, 2019 10:37 pm

here is the link:

http://www.osiweb.org/osiforum/viewtopi ... 0&start=23

this same thread page 3 looks like the 23rd post. :) this link should take you right to it. :)
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B. :)

Jeff
Posts: 331
Joined: Fri Mar 07, 2014 4:44 am
Location: British Columbia, Canada

Re: Building the KLyball 600D

Post by Jeff » Sat Apr 13, 2019 4:37 pm

Thanks, Walter.

/J
Image

Post Reply