Klyball D13 V2.0 : What jumpers worked for me

Post Reply
nama
Posts: 299
Joined: Wed Mar 30, 2011 9:44 am
Location: New Zealand
Contact:

Klyball D13 V2.0 : What jumpers worked for me

Post by nama » Tue Apr 02, 2019 2:09 am

C2 + D&N board + 5.25" drive
D13 V2.jpg
D13 V2.jpg (486.34 KiB) Viewed 1532 times
Last edited by nama on Wed Apr 03, 2019 8:12 pm, edited 1 time in total.

2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono), D13 + Gotek
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON
Spares - 2 x 527, 1 x 527 [600, 610, D13 boards]

Klyball
Posts: 195
Joined: Tue Dec 09, 2014 12:53 am

Re: Klyball D13 V2.0 : What jumpers worked for me

Post by Klyball » Tue Apr 02, 2019 9:12 pm

Should it not be 5-6 instead of 4-5.
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598

nama
Posts: 299
Joined: Wed Mar 30, 2011 9:44 am
Location: New Zealand
Contact:

Re: Klyball D13 V2.0 : What jumpers worked for me

Post by nama » Wed Apr 03, 2019 8:12 pm

Ooops..you are correct sir
Image updated

2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono), D13 + Gotek
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON
Spares - 2 x 527, 1 x 527 [600, 610, D13 boards]

BillO
Posts: 141
Joined: Tue Jul 08, 2014 4:03 pm
Location: Canada
Contact:

Re: Klyball D13 V2.0 : What jumpers worked for me

Post by BillO » Thu Apr 04, 2019 11:50 pm

What is different about V2?
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
KLyball memory card

nama
Posts: 299
Joined: Wed Mar 30, 2011 9:44 am
Location: New Zealand
Contact:

Re: Klyball D13 V2.0 : What jumpers worked for me

Post by nama » Sun Apr 07, 2019 6:46 am

...more jumpers?

I'll let Grant answer this.

2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono), D13 + Gotek
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON
Spares - 2 x 527, 1 x 527 [600, 610, D13 boards]

Klyball
Posts: 195
Joined: Tue Dec 09, 2014 12:53 am

Re: Klyball D13 V2.0 : What jumpers worked for me

Post by Klyball » Wed Apr 10, 2019 10:55 am

It is ready for dual two sided drives abcd or any other combo and has a motor control curcuit if wanted. V1 needed mod for dual 2 sided drives , jumper too disengage data separation and motor control
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598

Post Reply