Questions about the Klyball 600D

Post Reply
User avatar
IanB
Posts: 3
Joined: Sat Jan 11, 2020 4:52 pm

Questions about the Klyball 600D

Post by IanB » Sun Jan 12, 2020 10:03 pm

I'm thinking about building a Klyball 600D so is anyone selling PCBs at the moment?

If not, I'll probably get some made but is there any preferred PCB manufacturer that has made them before? (I've previously used JLCPCB for a couple of other projects)

BTW I looked at the gerbers in Kicad's GerbView and it looks like the silk screen IC's all have the notches at the wrong end:

silkscreen.png
silkscreen.png (19.43 KiB) Viewed 656 times

Any reason for that?

Also is there any free software that can edit gerbers? I tried importing the gerbers into Kicad's PCBnew but it really mangled them.

Klyball
Posts: 198
Joined: Tue Dec 09, 2014 12:53 am

Re: Questions about the Klyball 600D

Post by Klyball » Thu Jan 16, 2020 12:35 am

Hi, i have a few boards still available , and the silk screen was just a marker i was using when i was doing the boards , i didn't actually think about the orientation .

PM me for details
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598

waltermixxx
Posts: 119
Joined: Sun Feb 03, 2019 10:31 pm

Re: Questions about the Klyball 600D

Post by waltermixxx » Fri Jan 17, 2020 5:04 pm

It’s a great board. I ordered 3 built 2 and have one for myself. Steve Gray and Josh Bensadon have the other two. :0)

Steve gray is developing a colour board for it that produces rgb output, and it works great. :0)

Cheers!!
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B. :)

Post Reply