Replacement part for J3 connector on 505B board

Post Reply
lowrybt1
Posts: 84
Joined: Sun Mar 08, 2015 3:42 pm

Replacement part for J3 connector on 505B board

Post by lowrybt1 » Thu Dec 07, 2017 3:34 am

Hello,

Can anyone recommend a current-day manufacturer/supplier and part-numbers for connectors\cables that would replace the J3 connector (and cable) on the 505B. These have the part numbers SC12-FM and SC12-MM in the SAMS C4P service manual.

Thanks, Tom
C4PDF w. 24K, 2 x 5.25 MPI B-51 drives
C1P RevB with fully-populated 610 board and A-13. Klyball D-13.
Spares: 600 Rev.D, 610 board, 540A, A-13 with homebuilt data separator, MPI B-51 logic board (w/o data sep module) and mechanicals

dave
Site Admin
Posts: 426
Joined: Tue Sep 09, 2008 5:24 am

Re: Replacement part for J3 connector on 505B board

Post by dave » Thu Dec 07, 2017 9:26 pm

This file contains some replacement parts, including the molex connectors:

12-pin right-angle (horizontal) edge connector (sockets): Molex 09-52-3121
12-pin vertical molex connector (sockets): Molex 09-52-3123

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest