NEW SAMS SCANS

billdrom
Posts: 15
Joined: Sat Dec 26, 2009 4:08 pm
Location: Somerdale,New Jersey

Re: NEW SAMS SCANS

Post by billdrom » Fri Jan 31, 2020 7:59 pm

I was just looking for more info on the 470 board.
Trying to bring up eight inch drives on a C8p system.

Bill

billdrom
Posts: 15
Joined: Sat Dec 26, 2009 4:08 pm
Location: Somerdale,New Jersey

Re: NEW SAMS SCANS

Post by billdrom » Fri Jan 31, 2020 8:00 pm

I was just looking for more info on the 470 board.
Trying to bring up eight inch drives on a C8p system.

Bill

Jeff
Posts: 347
Joined: Fri Mar 07, 2014 4:44 am
Location: British Columbia, Canada

Re: NEW SAMS SCANS

Post by Jeff » Sat Feb 01, 2020 10:34 pm

The raw pages can be found here:
http://www.chaosdesigns.ca/OSI/Manuals/ ... index.html
/Jeff
Image

dave
Site Admin
Posts: 594
Joined: Tue Sep 09, 2008 5:24 am

Re: NEW SAMS SCANS

Post by dave » Sun Feb 02, 2020 1:54 am

@Jeff, it looks as if you actually have all the pages stitched together, and the only thing left is to combine them into a PDF. Is that right? If so, I'll get started on it and get it posted.

Dave

Jeff
Posts: 347
Joined: Fri Mar 07, 2014 4:44 am
Location: British Columbia, Canada

Re: NEW SAMS SCANS

Post by Jeff » Mon Feb 03, 2020 8:57 pm

Hi Dave,
Yes, when I posted the files, I realized that I was further along than I had remembered. If you can combine them, that would be great and save me some effort.

Cheers
/Jeff
Image

dave
Site Admin
Posts: 594
Joined: Tue Sep 09, 2008 5:24 am

Re: NEW SAMS SCANS

Post by dave » Tue Feb 04, 2020 1:15 am

Gary combined them, and I'm OCR'ing and shrinking the PDF right now. I'll post it soon. Many thanks for this!

billdrom
Posts: 15
Joined: Sat Dec 26, 2009 4:08 pm
Location: Somerdale,New Jersey

Re: NEW SAMS SCANS

Post by billdrom » Thu Feb 06, 2020 5:53 pm

Yes, I am working on the 470 card and would like to see that section of the scan.
Thanks for your time.

Bill

dave
Site Admin
Posts: 594
Joined: Tue Sep 09, 2008 5:24 am

Re: NEW SAMS SCANS

Post by dave » Thu Feb 06, 2020 6:06 pm

I have posted the PDFs (full resolution and optimized/smaller size) in the manuals section of the site.

Jeff, thanks so much for doing this scan and putting in all that effort to make the schematics beautiful!

Dave

Jeff
Posts: 347
Joined: Fri Mar 07, 2014 4:44 am
Location: British Columbia, Canada

Re: NEW SAMS SCANS

Post by Jeff » Sat Feb 08, 2020 5:47 pm

excellent!
/Jeff
Image

Post Reply