I have managed to create a working image of WP-2 the early OSI Word Processor from dumps sent to me by Mark Spankus.
Unfortunately the WP-3 disk dump has a corrupt track 6 sector 2. It looks like the disk was booted on a system with less than 24K working memory. The Bexec* loads this sector at $5100 and modifies a few locations then saves back to disk. This sector has been overwritten with $51...$52...
Anyone have WP-1B or WP-3 manuals or disks ?
WP-1B integrates with the Assembler offering auto line numbering, a full line editor and global find and replace.
from The Second Book of OSI:
WP-2 WP-3 Ohio Scientific Word Processors
-
- Posts: 356
- Joined: Wed Mar 16, 2011 1:49 am
- Location: New Zealand
WP-2 WP-3 Ohio Scientific Word Processors
- Attachments
-
- WP2.zip
- WP2.1 update
- (91 KiB) Downloaded 678 times
Last edited by MK14HAK on Fri Sep 30, 2016 6:42 am, edited 6 times in total.
600RevB:16K,2MHz,64x32,470,CEGMON
SuperKit:502,540B,542B,CEGMON, 8" and 5" FDDs
Cards:PE IO,6522 D-A-D, AY3-8910,ProgramGraphics,Color,UK101
WIP:HexDOS,FDD Emulator
SuperKit:502,540B,542B,CEGMON, 8" and 5" FDDs
Cards:PE IO,6522 D-A-D, AY3-8910,ProgramGraphics,Color,UK101
WIP:HexDOS,FDD Emulator
-
- Posts: 369
- Joined: Wed Mar 30, 2011 9:44 am
- Location: New Zealand
- Contact:
Re: WP-2 WP-3 Ohio Scientific Word Processors
Great news about WP-2
Not so great about WP-3
Thanks for your efforts.
Phil
Not so great about WP-3
Thanks for your efforts.
Phil
2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono) [SOLD]
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON + 610 board 24k + D13
Spares - 3 x 527, 1 x 505, Backplane
-
- Site Admin
- Posts: 717
- Joined: Tue Sep 09, 2008 5:24 am
Re: WP-2 WP-3 Ohio Scientific Word Processors
Thanks, mike! I had the manual but thought I already had a scan of it. I just scanned it and added your ZIP file and the manual in the software section.
Dave
Dave
-
- Posts: 356
- Joined: Wed Mar 16, 2011 1:49 am
- Location: New Zealand
Re: WP-2 WP-3 Ohio Scientific Word Processors
Great.Thanks Dave. Will be nice to get WP-1B and WP3 editor images up sometime.
WP-1B integrates with the Assembler offering auto line numbering, a full line editor and global find and replace. WP-3 was preferred over WP-2 for its friendlier editing and extra word processing features.
Brings back a few memories, I had both versions and the WP-3 manual back in the day using Microline 80 printer.
WP-1B integrates with the Assembler offering auto line numbering, a full line editor and global find and replace. WP-3 was preferred over WP-2 for its friendlier editing and extra word processing features.
Brings back a few memories, I had both versions and the WP-3 manual back in the day using Microline 80 printer.
600RevB:16K,2MHz,64x32,470,CEGMON
SuperKit:502,540B,542B,CEGMON, 8" and 5" FDDs
Cards:PE IO,6522 D-A-D, AY3-8910,ProgramGraphics,Color,UK101
WIP:HexDOS,FDD Emulator
SuperKit:502,540B,542B,CEGMON, 8" and 5" FDDs
Cards:PE IO,6522 D-A-D, AY3-8910,ProgramGraphics,Color,UK101
WIP:HexDOS,FDD Emulator
-
- Posts: 356
- Joined: Wed Mar 16, 2011 1:49 am
- Location: New Zealand
Re: WP-2 WP-3 Ohio Scientific Word Processors
The C4_WP2 uploaded earlier uses $3179 as its workspace start. $3279 or $3A79 is normal for other 5" systems.
Indirect file usage will allow you to load and edit Assembly language and BASIC source files from these disks with WP2. I have added WP2.1 that modifies the indirect file markers in WP2 to be compatible with 65D markers to allow this method of loading. Also added the DOS GO $xxxx command back at the expense of the X16OUT routine. (WP2.1 added to earlier zip)
WP2 allows Edit n for line recall and similar in-line editing as for DOS3.3 editor , plus global search/replace, move, merge etc.
Indirect file usage: Edit Assembler or BASIC source files in WP2.
BASIC
POKE 9368,XX:POKE9554,XX:REM XX is page boundary e.g $5000 = 80 for indirect file. 65D BASIC.
POKE14646,91:POKE11667,XX:REM 65U BASIC
LIST[ (LIST+SHIFT+K) lists source to indirect file location.
] (SHIFT+M) closes output to indirect file.
ASSEMBLER
:@2552/80 50 ;set page eg $5000 for indirect file start.
.P[ (P+SHIFT+K) lists source to indirect file location.
.] (SHIFT+M) closes output to indirect file.
Boot WP2.1 modified version.
.
.WH5000 ;set page eg $5000 for indirect file start.
.CTRL+X move you indirect file to WP2 workspace for easy editing.
.P[ (P+SHIFT+K) lists source to indirect file location.
.] (SHIFT+M) closes output to indirect file.
... any interest in C1 version ??
Indirect file usage will allow you to load and edit Assembly language and BASIC source files from these disks with WP2. I have added WP2.1 that modifies the indirect file markers in WP2 to be compatible with 65D markers to allow this method of loading. Also added the DOS GO $xxxx command back at the expense of the X16OUT routine. (WP2.1 added to earlier zip)
WP2 allows Edit n for line recall and similar in-line editing as for DOS3.3 editor , plus global search/replace, move, merge etc.
Indirect file usage: Edit Assembler or BASIC source files in WP2.
BASIC
POKE 9368,XX:POKE9554,XX:REM XX is page boundary e.g $5000 = 80 for indirect file. 65D BASIC.
POKE14646,91:POKE11667,XX:REM 65U BASIC
LIST[ (LIST+SHIFT+K) lists source to indirect file location.
] (SHIFT+M) closes output to indirect file.
ASSEMBLER
:@2552/80 50 ;set page eg $5000 for indirect file start.
.P[ (P+SHIFT+K) lists source to indirect file location.
.] (SHIFT+M) closes output to indirect file.
Boot WP2.1 modified version.
.
.WH5000 ;set page eg $5000 for indirect file start.
.CTRL+X move you indirect file to WP2 workspace for easy editing.
.P[ (P+SHIFT+K) lists source to indirect file location.
.] (SHIFT+M) closes output to indirect file.
... any interest in C1 version ??
600RevB:16K,2MHz,64x32,470,CEGMON
SuperKit:502,540B,542B,CEGMON, 8" and 5" FDDs
Cards:PE IO,6522 D-A-D, AY3-8910,ProgramGraphics,Color,UK101
WIP:HexDOS,FDD Emulator
SuperKit:502,540B,542B,CEGMON, 8" and 5" FDDs
Cards:PE IO,6522 D-A-D, AY3-8910,ProgramGraphics,Color,UK101
WIP:HexDOS,FDD Emulator