Does anyone know what additional commands are available in Plot Basic -- and/or know where Plot Basic instructions might be found?
Thanks, Tom
Plot Basic Instruction Set
-
- Posts: 212
- Joined: Sun Mar 08, 2015 3:42 pm
- Location: New York State
Plot Basic Instruction Set
C8PDF w. 48K, 2x 520 24K RAM boards and Glitchworks 64K board
OSI 567 Telephony board
Spare 8" drives
Klyball D-13
OSI 567 Telephony board
Spare 8" drives
Klyball D-13
-
- Posts: 325
- Joined: Mon Oct 06, 2008 1:54 pm
- Location: Markham, Ontario, Canada
- Contact:
Re: Plot Basic Instruction Set
PlotBASIC commands can be found on pg 9 of the TOSIE newsletter July/83 issue.
Edit: Ooops, I don't see it online. I have it, but I thought I had already scanned it. I guess I'll have to add that to my list
PLOTn(parameters) where 'n' is 0 to 8.
PLOT0(x,y) - set origin
PLOT1(x,y,chr,col) - plot a square
PLOT2 hmm, not documented
PLOT3(x,y,x2,y2,chr,col) - create rectangle
PLOT4(chr,col) - fill the screen
PLOT5(x,y) - plot a point
PLOT6(x,y,x2,y2) - plot a line
PLOT7(A$;B%(0,0);x,y) - bring in a figure from directory and position it
PLOT8(B%(0,0),dir) - move the figure in a direction (0-9)
Steve
Edit: Ooops, I don't see it online. I have it, but I thought I had already scanned it. I guess I'll have to add that to my list
PLOTn(parameters) where 'n' is 0 to 8.
PLOT0(x,y) - set origin
PLOT1(x,y,chr,col) - plot a square
PLOT2 hmm, not documented
PLOT3(x,y,x2,y2,chr,col) - create rectangle
PLOT4(chr,col) - fill the screen
PLOT5(x,y) - plot a point
PLOT6(x,y,x2,y2) - plot a line
PLOT7(A$;B%(0,0);x,y) - bring in a figure from directory and position it
PLOT8(B%(0,0),dir) - move the figure in a direction (0-9)
Steve
C4P working, C1P working. 600D Replica working, C4P+D&N floppy not working. 505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested.
-
- Posts: 325
- Joined: Mon Oct 06, 2008 1:54 pm
- Location: Markham, Ontario, Canada
- Contact:
Re: Plot Basic Instruction Set
Turns out I had scanned the issue. I have sent it to Dave, so hopefully he will post it soon.
Also scanned and sent him two more issues.
Steve
Also scanned and sent him two more issues.
Steve
C4P working, C1P working. 600D Replica working, C4P+D&N floppy not working. 505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested.
-
- Site Admin
- Posts: 717
- Joined: Tue Sep 09, 2008 5:24 am
Re: Plot Basic Instruction Set
Posted Plus, the scan of the Aardvark Tiny BASIC Compiler v1.3 you uploaded a while back. Thanks!
Dave
Dave
-
- Posts: 325
- Joined: Mon Oct 06, 2008 1:54 pm
- Location: Markham, Ontario, Canada
- Contact:
Re: Plot Basic Instruction Set
Thanks Dave!
C4P working, C1P working. 600D Replica working, C4P+D&N floppy not working. 505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested.