Plot Basic Instruction Set

Post Reply
lowrybt1
Posts: 84
Joined: Sun Mar 08, 2015 3:42 pm

Plot Basic Instruction Set

Post by lowrybt1 » Wed Nov 01, 2017 4:37 am

Does anyone know what additional commands are available in Plot Basic -- and/or know where Plot Basic instructions might be found?

Thanks, Tom
C4PDF w. 24K, 2 x 5.25 MPI B-51 drives
C1P RevB with fully-populated 610 board and A-13. Klyball D-13.
Spares: 600 Rev.D, 610 board, 540A, A-13 with homebuilt data separator, MPI B-51 logic board (w/o data sep module) and mechanicals

Steve Gray
Posts: 181
Joined: Mon Oct 06, 2008 1:54 pm
Location: Markham, Ontario, Canada
Contact:

Re: Plot Basic Instruction Set

Post by Steve Gray » Sun Nov 05, 2017 12:16 am

PlotBASIC commands can be found on pg 9 of the TOSIE newsletter July/83 issue.

Edit: Ooops, I don't see it online. I have it, but I thought I had already scanned it. I guess I'll have to add that to my list ;-)

PLOTn(parameters) where 'n' is 0 to 8.

PLOT0(x,y) - set origin
PLOT1(x,y,chr,col) - plot a square
PLOT2 hmm, not documented
PLOT3(x,y,x2,y2,chr,col) - create rectangle
PLOT4(chr,col) - fill the screen
PLOT5(x,y) - plot a point
PLOT6(x,y,x2,y2) - plot a line
PLOT7(A$;B%(0,0);x,y) - bring in a figure from directory and position it
PLOT8(B%(0,0),dir) - move the figure in a direction (0-9)

Steve
C4P+D&N floppy not working, 2x C4P not working, C1P not working, Superboard not working.
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested

Steve Gray
Posts: 181
Joined: Mon Oct 06, 2008 1:54 pm
Location: Markham, Ontario, Canada
Contact:

Re: Plot Basic Instruction Set

Post by Steve Gray » Wed Nov 15, 2017 9:40 pm

Turns out I had scanned the issue. I have sent it to Dave, so hopefully he will post it soon.
Also scanned and sent him two more issues.

Steve
C4P+D&N floppy not working, 2x C4P not working, C1P not working, Superboard not working.
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested

dave
Site Admin
Posts: 426
Joined: Tue Sep 09, 2008 5:24 am

Re: Plot Basic Instruction Set

Post by dave » Thu Nov 16, 2017 4:37 pm

Posted :-) Plus, the scan of the Aardvark Tiny BASIC Compiler v1.3 you uploaded a while back. Thanks!

Dave

Steve Gray
Posts: 181
Joined: Mon Oct 06, 2008 1:54 pm
Location: Markham, Ontario, Canada
Contact:

Re: Plot Basic Instruction Set

Post by Steve Gray » Fri Nov 17, 2017 6:41 pm

Thanks Dave!
C4P+D&N floppy not working, 2x C4P not working, C1P not working, Superboard not working.
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest