Well it's done, and It's working
I had a bit of a false start with a "gammy" SYNMON" eprom,
I borrowed the CEGMON from my REV. B board and my REV. D is fully functional, and populated.
Thanks everyone for the boards and support, 502 is next, along with 541B and 542.
Cheers.
Building the KLyball 600D
-
- Posts: 129
- Joined: Sun Feb 03, 2019 10:31 pm
Re: Building the KLyball 600D
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B.
-
- Posts: 129
- Joined: Sun Feb 03, 2019 10:31 pm
Re: Building the KLyball 600D
He He, ok not exactly done, I still have to install the matrix of keyboard switches and caps,
and some kind of support for the Space bar. but at least the electronics and computerie bits work.
Cheers.
and some kind of support for the Space bar. but at least the electronics and computerie bits work.
Cheers.
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B.
-
- Posts: 216
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Building the KLyball 600D
Congratulations!
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
- Posts: 370
- Joined: Fri Mar 07, 2014 4:44 am
- Location: British Columbia, Canada
Re: Building the KLyball 600D
Awesome!!! Great work!
/Jeff
/Jeff
-
- Posts: 326
- Joined: Mon Oct 06, 2008 1:54 pm
- Location: Markham, Ontario, Canada
- Contact:
Re: Building the KLyball 600D
Looking good! I’ll be picking your brain when I finally work on mine
Last edited by Steve Gray on Tue Apr 09, 2019 12:16 pm, edited 1 time in total.
C4P working, C1P working. 600D Replica working, C4P+D&N floppy not working. 505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested.
-
- Posts: 233
- Joined: Tue Dec 09, 2014 12:53 am
Re: Building the KLyball 600D
Nice, I like the screw terminals
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
- Posts: 129
- Joined: Sun Feb 03, 2019 10:31 pm
Re: Building the KLyball 600D
Thank you.
I thought it might be a nice way to hook up the very few things that might need to be connected there.
Cheers.
I think I'm gonna have to harvest keys from a usb mx keyboard I purchased. Blue MX keys,
I'm hoping they are 5 pin
I thought it might be a nice way to hook up the very few things that might need to be connected there.
Cheers.
I think I'm gonna have to harvest keys from a usb mx keyboard I purchased. Blue MX keys,
I'm hoping they are 5 pin
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B.
-
- Posts: 375
- Joined: Wed Mar 30, 2011 9:44 am
- Location: New Zealand
- Contact:
Re: Building the KLyball 600D
Looks Great!
2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono) [SOLD]
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON + 610 board 24k + D13
Spares - 3 x 527, 1 x 505, Backplane
-
- Posts: 129
- Joined: Sun Feb 03, 2019 10:31 pm
Re: Building the KLyball 600D
I harvested some blue MX switches from a usb keyboard.
I have not soldered these in yet, but will most likely do that tomorrow...
might use this hardware (may have to extend the cross bar....
I have not soldered these in yet, but will most likely do that tomorrow...
might use this hardware (may have to extend the cross bar....
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B.
-
- Posts: 129
- Joined: Sun Feb 03, 2019 10:31 pm
Re: Building the KLyball 600D
I will post pictures of the completed board later today. These mx blues (harvested keys at least) bounce a bit. When the brand new Gateron keys come in, I will replace them. But she works.
Turning into quite an OSI Junkie (HTFDTH?) Superboard II REV B-40K, 9600b, HC-05 Bluetooth, Superboard II Rev D, C4P rebuild- 502, 542c, 540B.