Dsiplay interface for UK101

[jazzade]

I've just bought a Viewtek LM-1510 secondhand on eBay for a bargain price. Whilst the 20" Dell would have been good, this 15" rackmount is more manageable for my setup.

I'll let you know how well it works with the UK101.

[ronin47]

I've just bought a Viewtek LM-1510 secondhand on eBay for a bargain price. Whilst the 20" Dell would have been good, this 15" rackmount is more manageable for my setup.

I'll let you know how well it works with the UK101.

Cool, will keep an eye open for your next post

[jazzade]

I'm pleased to report that the Viewtek LM-1510 works fine with the UK101 without using a buffer circuit.

The only issue is that a couple of pixels on the left-hand edge of the display are obscured by the casing and the framing isn't adjustable using its On-Screen Display menu. I've been unable to find a service manual for the display (only the attached spec sheet) but wonder whether the alignment might be adjustable on the UK101 itself?

[ronin47]

I'm pleased to report that the Viewtek LM-1510 works fine with the UK101 without using a buffer circuit.

The only issue is that a couple of pixels on the left-hand edge of the display are obscured by the casing and the framing isn't adjustable using its On-Screen Display menu. I've been unable to find a service manual for the display (only the attached spec sheet) but wonder whether the alignment might be adjustable on the UK101 itself?

Good to see the display works

Mine was off to the left on my displays and I had to patch my SYSMON ROM in order to make it work correctly.

Mine does have a custom ROM though, there is more info here: viewtopic.php?t=876

[jazzade]

Ah, mine has the CEGMON ROM. I'll look into it further in due course but having had a quick look at the manual, the screen handler is fairly comprehensive.

Thank you!

[ronin47]

Ah, mine has the CEGMON ROM. I'll look into it further in due course.

Thank you!

No problem, bxdanny might be able to advise as he is ace at this sort of thing