Page 6 of 8
Re: Building the KLyball 600D
Posted: Mon Apr 08, 2019 4:28 am
by waltermixxx
Well it's done, and It's working
I had a bit of a false start with a "gammy" SYNMON" eprom,
I borrowed the CEGMON from my REV. B board and my REV. D is fully functional, and populated.
Thanks everyone for the boards and support,
502 is next, along with 541B and 542.
Cheers.
- IMG_0275.jpeg (1.27 MiB) Viewed 9819 times
- IMG_0274.jpeg (806.21 KiB) Viewed 9819 times
Re: Building the KLyball 600D
Posted: Mon Apr 08, 2019 10:43 am
by waltermixxx
He He, ok not exactly done, I still have to install the matrix of keyboard switches and caps,
and some kind of support for the Space bar.
but at least the electronics and computerie bits work.
Cheers.
Re: Building the KLyball 600D
Posted: Mon Apr 08, 2019 2:48 pm
by BillO
Congratulations!
Re: Building the KLyball 600D
Posted: Mon Apr 08, 2019 4:29 pm
by Jeff
Awesome!!! Great work!
/Jeff
Re: Building the KLyball 600D
Posted: Tue Apr 09, 2019 3:10 am
by Steve Gray
Looking good! I’ll be picking your brain when I finally work on mine
Re: Building the KLyball 600D
Posted: Tue Apr 09, 2019 8:18 am
by Klyball
Nice, I like the screw terminals
Re: Building the KLyball 600D
Posted: Tue Apr 09, 2019 3:42 pm
by waltermixxx
Thank you.
I thought it might be a nice way to hook up the very few things that might need to be connected there.
Cheers.
I think I'm gonna have to harvest keys from a usb mx keyboard I purchased. Blue MX keys,
I'm hoping they are 5 pin
Re: Building the KLyball 600D
Posted: Wed Apr 10, 2019 2:59 am
by nama
Looks Great!
Re: Building the KLyball 600D
Posted: Wed Apr 10, 2019 4:12 am
by waltermixxx
I harvested some blue MX switches from a usb keyboard.
I have not soldered these in yet, but will most likely do that tomorrow...
- IMG_0285.JPEG (1.14 MiB) Viewed 9763 times
- IMG_0287.JPEG (1.52 MiB) Viewed 9763 times
- IMG_0288.JPEG (963.11 KiB) Viewed 9763 times
might use this hardware (may have to extend the cross bar....
- IMG_0289.jpeg (850.22 KiB) Viewed 9763 times
Re: Building the KLyball 600D
Posted: Thu Apr 11, 2019 11:29 am
by waltermixxx
I will post pictures of the completed board later today. These mx blues (harvested keys at least) bounce a bit. When the brand new Gateron keys come in, I will replace them. But she works.