Wanted - higher quality 505 schematic scan
Wanted - higher quality 505 schematic scan
Hi all,
I can't recall who gave me the 505 schematics I have in the archive. That scan was made way back when bandwidth was expensive, scanners were slow and tedious, and disk space was a precious resource.
Of course all that has changed by now. Would anybody with a set of original 505 schematics be willing to make a fresh scan using a 300 x 300 grayscale setting on a modern scanner? I'd be happy to turn those into a PDF if necessary. Or, if you already have such a scan, and are willing to let me use it for the archive--fully attributed--even better! Thanks in advance!
Dave
I can't recall who gave me the 505 schematics I have in the archive. That scan was made way back when bandwidth was expensive, scanners were slow and tedious, and disk space was a precious resource.
Of course all that has changed by now. Would anybody with a set of original 505 schematics be willing to make a fresh scan using a 300 x 300 grayscale setting on a modern scanner? I'd be happy to turn those into a PDF if necessary. Or, if you already have such a scan, and are willing to let me use it for the archive--fully attributed--even better! Thanks in advance!
Dave
Re: Wanted - higher quality 505 schematic scan
Also, high quality 540 / 542 rev B scans would be most welcome.
Dave
Dave
-
Steve Gray
- Posts: 158
- Joined: Mon Oct 06, 2008 1:54 pm
- Location: Markham, Ontario, Canada
- Contact:
Re: Wanted - higher quality 505 schematic scan
I have 540/542 rev B schematics in my OSI binder... will scan them for you this week.
Steve
Steve
C4P+D&N floppy not working, 2x C4P not working, C1P not working, Superboard not working.
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
Re: Wanted - higher quality 505 schematic scan
That's great, thanks!
-
Steve Gray
- Posts: 158
- Joined: Mon Oct 06, 2008 1:54 pm
- Location: Markham, Ontario, Canada
- Contact:
Re: Wanted - higher quality 505 schematic scan
Both have been scanned at 600dpi 8-bit greyscale, jpg. I'm uploading them now. These are the raw pages from my binder with a few of my handwritten notes. If you want to wait I will clean them up and make PDF's, or you can use them as-is if you have the space or there is demand.
Steve
Steve
C4P+D&N floppy not working, 2x C4P not working, C1P not working, Superboard not working.
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
Re: Wanted - higher quality 505 schematic scan
Hi Steve,
The 540B and 542B scans are beautiful. I will have no problem turning them into PDF's.
Best regards,
Dave
The 540B and 542B scans are beautiful. I will have no problem turning them into PDF's.
Best regards,
Dave
-
Steve Gray
- Posts: 158
- Joined: Mon Oct 06, 2008 1:54 pm
- Location: Markham, Ontario, Canada
- Contact:
Re: Wanted - higher quality 505 schematic scan
I also have 527 and 502 schematics which I can do the same way if needed.
Steve
Steve
C4P+D&N floppy not working, 2x C4P not working, C1P not working, Superboard not working.
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
-
Steve Gray
- Posts: 158
- Joined: Mon Oct 06, 2008 1:54 pm
- Location: Markham, Ontario, Canada
- Contact:
Re: Wanted - higher quality 505 schematic scan
I have uploaded Aardvark Lightpen for C1 instructions in PDF format.
Steve
Steve
C4P+D&N floppy not working, 2x C4P not working, C1P not working, Superboard not working.
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
-
Steve Gray
- Posts: 158
- Joined: Mon Oct 06, 2008 1:54 pm
- Location: Markham, Ontario, Canada
- Contact:
Re: Wanted - higher quality 505 schematic scan
I have uploaded the Omega Science OSI dealer price list for Sept 1980 in PDF format. This is the place I bought my C4P... (you can see the invoice on my web page
)
Steve
Steve
C4P+D&N floppy not working, 2x C4P not working, C1P not working, Superboard not working.
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
-
Steve Gray
- Posts: 158
- Joined: Mon Oct 06, 2008 1:54 pm
- Location: Markham, Ontario, Canada
- Contact:
Re: Wanted - higher quality 505 schematic scan
I have uploaded the OSI Disk and Cassette software handout in PDF format 600dpi (since the text is quite small).
Steve
Steve
C4P+D&N floppy not working, 2x C4P not working, C1P not working, Superboard not working.
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
505 board, 610 board, Mittendorf board, TOSIE hacker board need testing, PicoDOS disk untested
Who is online
Users browsing this forum: No registered users and 2 guests