- D13 V2.jpg (486.34 KiB) Viewed 9066 times
Klyball D13 V2.0 : What jumpers worked for me
-
nama
- Posts: 375
- Joined: Wed Mar 30, 2011 9:44 am
- Location: New Zealand
- Contact:
Klyball D13 V2.0 : What jumpers worked for me
C2 + D&N board + 5.25" drive
Last edited by nama on Wed Apr 03, 2019 8:12 pm, edited 1 time in total.
2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono) [SOLD]
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON + 610 board 24k + D13
Spares - 3 x 527, 1 x 505, Backplane
-
Klyball
- Posts: 237
- Joined: Tue Dec 09, 2014 12:53 am
Re: Klyball D13 V2.0 : What jumpers worked for me
Should it not be 5-6 instead of 4-5.
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
-
nama
- Posts: 375
- Joined: Wed Mar 30, 2011 9:44 am
- Location: New Zealand
- Contact:
Re: Klyball D13 V2.0 : What jumpers worked for me
Ooops..you are correct sir
Image updated
Image updated
2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono) [SOLD]
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON + 610 board 24k + D13
Spares - 3 x 527, 1 x 505, Backplane
-
BillO
- Posts: 217
- Joined: Tue Jul 08, 2014 4:03 pm
- Location: Canada
- Contact:
Re: Klyball D13 V2.0 : What jumpers worked for me
What is different about V2?
Box stock Superboard II Rev. B
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
KLyball replica 600D, replica 610 & KLyball Data Separator
OMS SBME and SBME+ memory cards
OMS Digi-Mule expansion bus
KLyball memory card
-
nama
- Posts: 375
- Joined: Wed Mar 30, 2011 9:44 am
- Location: New Zealand
- Contact:
Re: Klyball D13 V2.0 : What jumpers worked for me
...more jumpers?
I'll let Grant answer this.
I'll let Grant answer this.
2P (1mhz 32k) - 502 + 8k + CEGMON + garbage collector fix BASIC, D&N MEM-CM9 + 24k, 540 (mono) [SOLD]
4PMF (2mhz 24k) - 505, 540, 527, D13 + 5.25" + Gotek
Superboard RevD - CEGMON + 610 board 24k + D13
Spares - 3 x 527, 1 x 505, Backplane
-
Klyball
- Posts: 237
- Joined: Tue Dec 09, 2014 12:53 am
Re: Klyball D13 V2.0 : What jumpers worked for me
It is ready for dual two sided drives abcd or any other combo and has a motor control curcuit if wanted. V1 needed mod for dual 2 sided drives , jumper too disengage data separation and motor control
Replica 600 Rev D:8K,CEGMON
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598
Replica 610 Rev B: 24k,MPI B-51 with Custom Data separator D-13
510 on the bench/replica 582 backplane/replica 470a /replica 555/original 570B/2 x Shugart 851
Ongoing : 630 ,620 ,510,542c,custom 590,SA1200,592,594,596,598